Installation And Use - Guardian VLA Instruction Manual

Vertical lifeline assembly
Table of Contents

Advertisement

Part #
Length
11335
200'
11321
25'
11322
30'
11323
50'
11324
75'
11325
100'
11326
130'
11327
150'
11328
200'
01330
25'
01340
50'
01350
75'
01360
100'
01365
150'
01345
200'

Installation and Use

!
WARNING
1. Eliminate all risk of lower end termination. Either ensure VLA will prevent user from striking next lower
level and that there is always adequate fall clearance, or that VLA will not reach the leading edge of any fall
hazard when used at its full length. NEVER tie knots in lifeline, except at extreme bottom of lifeline in order to
prevent Fall Arrester from detaching.
2. Eliminate or minimize all risk of swing fall.
3. If VLA has integral Shock Pack, attach Shock Pack end to compatible anchorage connector.
4. Attach Fall Arrester and Extension Lanyard to applicable harness D-ring.
5. To move along lifeline, compress and hold Fall Arrester handle.
ALWAYS adjust Fall Arrester to reduce slack in the system as much
as possible. When attached to Fall Arrester and moving along work
surface, ALWAYS do so by moving Fall Arrester along rope, and
NEVER by moving only the rope itself. For example, if moving from
a roof edge to the roof peak, engage handle of Fall Arrester and
move it up the VLA while walking to peak. DO NOT move up to
roof peak by moving VLA and keeping Fall Arrester stationary;
doing so can create free fall in excess of levels permitted by system.
6. To restrict Fall Arrester movement along lifeline, release Fall
Arrester handle.
7. NEVER grab the Fall Arrester in the event of a fall; doing so may
cause the unit to accidentally disengage and slip along the rope.
Description
Polydac Rope w/Snap Hook End
VLA w/3 Strand Polydac Rope, Shock Pack, Positioning Device, & 18" Lanyard Extension
VLA w/3 Strand Polydac Rope, Shock Pack, Positioning Device, & 18" Lanyard Extension
VLA w/3 Strand Polydac Rope, Shock Pack, Positioning Device, & 18" Lanyard Extension
VLA w/3 Strand Polydac Rope, Shock Pack, Positioning Device, & 18" Lanyard Extension
VLA w/3 Strand Polydac Rope, Shock Pack, Positioning Device, & 18" Lanyard Extension
VLA w/3 Strand Polydac Rope, Shock Pack, Positioning Device, & 18" Lanyard Extension
VLA w/3 Strand Polydac Rope, Shock Pack, Positioning Device, & 18" Lanyard Extension
VLA w/3 Strand Polydac Rope, Shock Pack, Positioning Device, & 18" Lanyard Extension
Standard 5/8" Rope w/Snap Hook End
Standard 5/8" Rope w/Snap Hook End
Standard 5/8" Rope w/Snap Hook End
Standard 5/8" Rope w/Snap Hook End
Standard 5/8" Rope w/Snap Hook End
Standard 5/8" Rope w/Snap Hook End
One connection per VLA.
NEVER attempt to remove components from VLA.
Compress
Release
to move
to stop
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

013200131001323013240132501326 ... Show all

Table of Contents