End-Of-Call Options; Saving A Phone Number - Sanyo SCP-3100 User Manual

End-of-Call Options

To display the following options, press
within 10 seconds after disconnecting a call.
Call Again to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone
mode.
Save Phone# to save the phone number in your Contacts list.
Go to Phone Book appears when the number is already in your
Contacts list. (See "Saving a Phone Number" below.)
Note:
The End-of-Call options are not displayed for calls identified as
No ID or Restricted.

Saving a Phone Number

Your phone can store up to seven phone numbers in each of
300 Contact entries with up to 500 total numbers. Each entry's
name can contain 16 characters. Your phone automatically sorts
the Contacts alphabetically.
1. Enter a phone number.
2. Press
Options
3. Select Save Phone#.
4. Select a label.
5. Enter a name and press
Once you have stored an entry in the Contacts list, you are
prompted to select the following entry modes:
New Name to enter a new name.
From Ph. Book to select a name from the Contacts entry list.
6. Press
Save
7. Press
Done
(right softkey).
.
(left softkey).
(left softkey) to return to standby mode.
Options (right softkey)
19