Bluetooth Settings: Device Name; Bluetooth Settings: Device Information; Setting Auto-Accept - Sanyo S1 User Manual

2. Select Phone or Hands-free.
Phone to route the call through the device with which
you answer the incoming call.
Hands-free to route the call through the hands-free device
even if you answer the incoming call with your phone.
Tip:
You can switch the call to your phone or to the hands-free device by
pressing (right softkey) >
Options
call.

Bluetooth Settings: Device Name

Device Name allows you to select a Bluetooth name for your
phone. Your phone's Bluetooth name will appear to other in-
range Bluetooth devices, depending on your Visibility settings.
1. From the Bluetooth Settings menu display, select Device Name.
2. Press and hold
to clear the current name.
3. Use your keypad to enter a new name and press

Bluetooth Settings: Device Information

To display your phone's device Information:
From the Bluetooth Settings menu display, select Device Info.

Setting Auto-Accept

You can configure your phone's accessibility to other Bluetooth
devices.
1. Select > Tools > Bluetooth.
2. Highlight the device from the trusted devices list and press
(right softkey) > Auto-Accept.
Options
3. Select a setting and press
On to allow other Bluetooth devices to initiate a
connection without any confirmation.
Off to display a confirmation screen, from which you can
accept or deny the connection.
Transfer Audio anytime during the
.
.
103