Using Your Phone's Battery And Charger - Sanyo MM-8300 Phone Manual

Pcs vision multimedia phone
Hide thumbs Also See for MM-8300:
Table of Contents

Advertisement

Using Your Phone's Battery and Charger

Battery Capacity
Your Sprint PCS Phone is equipped with a Lithium Ion
(LiIon) battery. It allows you to recharge your battery before
it is fully drained. The battery provides up to 3.5 hours of
continuous digital talk time (up to 2 hours in analog).
When the battery reaches 5% of its capacity, the battery
icon blinks. When there are approximately 5 minutes of
talk time left, the phone sounds an audible alert and then
powers down.
Note:
Long backlight settings, searching for service, vibrate mode, and
browser use affect the battery's talk and standby times.
Tip:
Be sure to watch your phone's battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
To install the LiIon battery:
To install, insert the battery into the opening on the
back of the phone and gently press down until the
latch snaps into place.
22
Section 2A: Your Sprint PCS Phone – The Basics

Advertisement

Table of Contents
loading

Table of Contents