Recording a Customized Announcement
1. Follow steps 1-5 on page 91.
2. Highlight Custom and press
3. Select Record.
If your announcement has already been recorded, select Yes
or No for overwriting.
4. Press
time is 12 seconds.)
5. Press
6. After the 1st recording, press
recording.
7. Press
Reviewing an Announcement
1. Press
2. Select Tools.
3. Select Voice Services.
4. Select Screen Call.
5. Select Announcement.
6. Highlight Pre-Recorded or Custom and press
softkey).
7. Select Play or Play:Speaker.
Erasing an Announcement
1. Follow steps 1-6 above.
2. Select Erase Name to erase the name for a pre-recorded
announcement.
– or –
Select Erase to erase the customized announcement.
3. Select Yes.
92
to start the 1st recording. (The maximum recording
to stop recording.
to stop recording.
to access the main menu.
(right softkey).
Edit
again to start the 2nd
(right
Edit