Download Print this page
Craftsman 76633 Butcher Block Operator's Manual

Craftsman 76633 Butcher Block Operator's Manual

72 inch wood table workbench

Advertisement

Quick Links

OPERATOR'S MANUAL
72 INCH WOOD TABLE WORKBENCH
Model
76633 - Butcher Block
UNPACKING INSTRUCTIONS
1. After opening shipping box, remove protective cardboard from
top of wood table and place cardboard on floor.
2. With the aid of an assistant, remove wood table and lay topside
down on cardboard to protect wood from scratching.
NOTE: Before laying down, determine the front side of the table.
Front side has the Craftsman logo engraved into the right corner.
3. Remove the remainder of workbench parts from shipping box.
Check parts and hardware against the PARTS and HARDWARE
lists on the next page. If parts or hardware are missing return
workbench to place of purchase for exchange.
* Product you purchased may vary from picture shown
REPLACEMENT PARTS
CALL 1-888-331-4569 FOR SERVICE PARTS. Refer to Parts
section of this manual for drawing and listing of Workbench parts.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the inner side of the leg panel.
CAPACITIES
• Weight of bench: 104.7 lbs.
• The maximum combined weight of bench and loaded table must
not exceed 1500 lbs.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
Used under license
MAINTENANCE
• Periodically the surfaces should be cleaned with a mild
detergent and water.
• Grease and oil can be removed with most standard cleaning
• Auto wax will preserve the luster finish of the workbench metal
parts. Apply the wax as to a car. The wax will also help protect
the metal parts against scratches.
WARNING indicates a hazardous situation which, if not
avoided,
could
result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
WARNING
• Use appropriate safety equipment when using power
and hand tools. Failure to do so may cause personal
injury or product damage.
• Obtain the aid of an assistant to assemble and move this unit.
Failure to do so may cause personal injury or product damage.
• DO NOT alter this product in any manner. This may cause per-
sonal injury or product damage.
• Unit must be located on a level surface. The product may be-
come unstable and tip if stored or moved on an un-level surface,
which may cause personal injury or product damage.
• DO NOT stand on this product. You may fall or cause product
to tip.
• DO NOT mount this product on a truck bed or any other moving
object. This may cause personal injury or product damage.
• Appropriately secure this product before moving with a forklift.
• DO NOT tow with power equipment. The product may tip,
which may cause personal injury or product damage.
WARRANTY
CRAFTSMAN LIMITED WARRANTY
FOR ONE YEAR from the date of sale this product is warranted
against defects in material or workmanship.
WITH PROOF OF SALE a defective product will be replaced free
of charge.
For warranty coverage details to obtain free replacement, visit the
web page: www.craftsman.com/warranty
This warranty is void if this product is ever used while providing
commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates,
IL 60179
SAFETY
F1984

Advertisement

loading

Summary of Contents for Craftsman 76633 Butcher Block

  • Page 1 NOTE: Before laying down, determine the front side of the table. • DO NOT mount this product on a truck bed or any other moving Front side has the Craftsman logo engraved into the right corner. object. This may cause personal injury or product damage.
  • Page 2: Tools Required

    HARDWARE NOTE : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two TOOLS REQUIRED: conditions: (1) this device may not cause harmful Phillips Head Screwdriver interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3 ASSEMBLY Items Needed: Table Front - Craftsman Logo Engraved on Top Side Right Corner Workbench Wood Table (Qty: 1) Left Leg Panel (Qty: 1) Right Leg Panel (Qty: 1) M6x12 Screw (Qty: 10) Underside of Workbench Table • Determine the front and back of table. Front has Craftsman logo engraved in right corner.
  • Page 4 Items Needed: Items Needed: Back Rail Cord Holder M6x12 Screw (Qty: 8) M6x12 Screw (Qty: 2) IMPORTANT: Before attaching Back Rail, adjust height of • With the aid of an assistant, set the the workbench in Leg Panels to the planned Workbench location. See upright position.
  • Page 5: Operation

    OPERATION Leveling Foot Adjustment • Adjust leveling position by turning the foot nut left to raise and right to lower the foot. Raise Lower Foot Nut Workbench Height Adjustment The Leg Panels are preset for a total workbench height of 36 inches (not including leveling feet). The Panels can be adjusted to alter the workbench height from 31 inches to 43 inches.
  • Page 6 Para respuestas a preguntas o problemas, y ordenar piezas o pedir servicio para la reparación de su equipo. To help us help you, register your product at www.craftsman.com/registration Para poderte ayudar mejor, registra tu producto en www.craftsman.com/registration Join the Craftsman Club today! www.craftsman.com/signup...