Sanyo Xacti VPC-CA 9 Instruction Manual page 176

TROUBLESHOOTING
The image is
too dark.
Viewing
images
The image is
too bright.
Viewing
images
153
English
Problem
The flash was
blocked by a
finger or other
object.
The subject
was too far
away.
The subject
was lit from
behind.
There is not
enough light.
The forced
flash mode is
selected.
The subject
was too bright.
The ISO
sensitivity
setting is
incorrect.
Cause
Hold the
camera
correctly, and
make sure the
flash is not
obstructed.
Capture the
image in the
range of
operation of the
flash.
Use the forced
flash mode.
Use the
exposure
compensation
function.
Use the spot
light-measuring
mode.
Adjust the ISO
sensitivity
setting.
Select a
different flash
mode.
Use the
exposure
compensation
function.
Set the ISO
sensitivity to
=.
Reference
Action
page
46, 62
46, 62
53
163
94
88
89
94
89