Page 1
Alarm Clock Radio Instruction manual CR-07PL...
Page 2
You’ll soon be up and running Looking forward to your new Alba alarm clock radio? Great. Then let’s get you started. Just follow this simple step-by-step guide and you’ll be good to Help and Guidance We’re here to help you get the most from your <enter product name>. Should you require any guidance, a simple solution can often be found online at: www.argos-support.co.uk...
Contents Safety information Safety information Battery handling and usage UK Mains plug information Getting to know your alarm clock radio Accessories Functions & Control Battery backup Standby mode Using your alarm clock radio Setting the clock Radio operation Presetting your favourite radio stations Dual alarms operation Setting Alarm 1 or Alarm 2 Checking alarm time...
Safety Information Important – Please read these instructions fully before installing or operating This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment.
Battery handling and usage Only adults should handle battery. Do not allow a child to use this apparatus unless the battery cover is securely attached to the unit. The battery type used in the unit is 2 x 1.5V AAA size batteries (not ...
If you require any further assistance, our technical experts are happy to help. For full details, refer to the product support section at the end of these instructions. Accessories included 1 x CR-07PL 1 x Instruction manual Functions & Control 1.
Indicator lights 14. PM indicator (12 hour version) 17. Alarm 2 buzzer 15. Alarm 1 buzzer 18. Alarm 2 radio 16. Alarm 1 radio Battery Backup The clock, alarm and preset settings can be protected against AC power failure with the battery for a short period of time. If no backup battery is installed or the power failure is prolonged, you will need to set the clock, alarm and preset settings again.
Power on/Radio mode Press POWER to switch the unit on and enter the radio mode. The radio frequency will briefly appear on the display and then return to clock time. Radio operation Press POWER to turn on the radio. The default FM radio frequency is 87.5 MHz.
Dual alarms operation Before setting the alarm time, make sure the Clock has been set. Setting Alarm 1 or Alarm 2 1. In standby mode, press and hold AL1 / AL2 until “12:00” flashes on the display. 2. While “12:00” is flashing, set the alarm time by repeatedly pressing HOUR / MIN.
Sleep timer operation The sleep function is designed to automatically turn off the Radio. Setting sleep timer In Radio mode, repeatedly press SLEEP to select the desired sleep time from 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. The radio will be turned off after the set sleep time has elapsed.
Product support Help is always at hand Help and assistance If you require any technical guidance or find that your Alarm clock radio is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Product support Help is always at hand Disposal You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.
Specifications are subject to change without notice. Alba disclaim any liability for loss or damage arising from the breakdown of the product. This guarantee is in addition to and does not diminish your statutory or legal rights.