Advertisement
a n y o
o t a l
STAIMS
~ Up to 1024 indoor units can be controlled by one PC ~
Functions of basic software
Standard remote control for all indoor units
Many timer schedule programs can be set on the calender
Detailed information display for alarms
CSV file output with alarm history, operating status.
Automatic data backup to HDD
STAIMS optional software
TECS-5000A
for Load distribution
~ Load distribution calculation for each tenant ~
Air-conditioner load distribution ratio is
calculated for each unit (tenant) with
used energy consumption data (m
Calculated data is stored with CSV type file.
Data of last 365 days is stored
STAIMS optional software
TECS-5000B
for BACnet interface
~ Connectable to BMS system ~
Can communicate with other
equipment by BACnet protocol.
SANYO air conditioners system can be
controlled by both BMS and STAIMS.
Max. 256 indoor units can be connected to 1 PC
(that has STAIMS basic & BACnet software).
STAIMS is suitable for large shopping centers and universities with many areas/ buildings. 1 "STAIMS" PC can have 4 independent systems at once.
Each system can have max. 8 C/A units, and control max. 512 units. In total, 1024 indoor units can be controlled by 1 "STAIMS" PC.
User PC
Wiring length (PC~C/A)
Max. 1 km
Max. 8 C/A for 1 system
Wiring length for each link from C/A
Max. 1 km
65
ir
conditioning ntelligent
anagement
y s t e m
Basic software / TECS-5000
With 4 upgrade packages the basic software can
be upgraded to suit individual requirements
, kWh).
3
Communication
Adaptor
Communication
Adaptor
Communication
Adaptor
STAIMS optional software
TECS-5000G
for Object layout display
~ Whole system can be controlled visually ~
Operating status monitor is available on
the layout display.
Object's layout and indoor unit's location
can be checked at once.
Each unit can be controlled by virtual
remote controller on the display.
Max. 4 layout screens are shown at once.
STAIMS optional software
TECS-5000W
for Web application
~ Web access & control from remote station ~
Accessing STAIMS software from remote PC.
You can monitor/operate SANYO system
by using Web browser (Internet Explorer).
Building A
Building B
Building D
Advertisement
