Table of Contents
Advertisement
5. Tap Done. The direct connection is then established.
Confirm
appears in the Status bar.
6. When prompted to complete the connection, the
recipient should tap OK. Your status field now reads
"Connected" and your connected device is listed within
the Wi-Fi Direct devices listing.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a
device name, activate your phone so other Bluetooth devices
can discover it, or scan for other, available Bluetooth devices
with which to pair. For more information, refer to "Bluetooth"
on page 228.
Turning Bluetooth On and Off
To turn Bluetooth on:
1. From the Home screen, press
Settings
2. In a single motion touch and slide the Bluetooth slider
to the right to turn it on.
The slider color indicates the activation status. When
active,
displays in the Status area.
248
DRAFT
Internal Use Only
and then tap
(Connections tab).
To turn Bluetooth off:
1. From the Home screen, press
Settings.
2. In a single motion touch and slide the Bluetooth slider
to the left to turn it off.
Note: Bluetooth must be enabled prior to use.
Changing the Device Name
1. From the Home screen, press
Settings
2. Tap the Device name field and use the on-screen
keyboard to edit the current device name.
3. Tap
to erase the current device name and enter
a new name for this device using the keyboard.
4. Tap OK to confirm your setting.
and then tap
and then tap
(More tab)
About device.
Advertisement
Table of Contents
