Page 1
Inscrivez le numéro de modèle ici. You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin: 3/32" For easy installation of your Delta faucet you will need: • To READ ALL the instructions completely before beginning.
Page 2
1/2" (13 mm) IPS Make connections to water lines. Use 1/2" IPS faucet connections (A), Position faucet (1) and gasket (2) on sink. Hand tighten nuts (3). or use the supplied coupling nuts (1) with 3/8" O.D. ball-nose risers (B). Option: If sink is uneven, use silicone under the gasket.
Page 3
Metal Pop-up Remove pivot nut (1). Install horizontal rod Apply silicone to underside of flange (1). Insert body (2) into sink. Screw flange (1) (2) and stopper (3) as removable (4) or non- Remove stopper (1) and flange (2). into body (2). removable (5).
Page 4
Pop-Ups with Metal Flange and Plastic Tail Piece Remove stopper (1), brass nut & washer (2), With pivot (1) facing toward faucet, pull Remove pivot nut (1). Install horizontal pop-up straight down into drain hole and rod (2) and stopper (3) as removable (4) black gasket (3) and tail piece (4).
Maintenance Remove aerator (1) using supplied wrench (2), and turn faucet handles (3) to the full on mixed position. Turn on hot and cold water If faucet leaks from spout outlet–Shut off water supplies–Replace supplies (4) and flush water lines for one minute. Important: This Seats and Springs (1).* flushes away any debris that could cause damage to internal parts.
January 1, 1995 and installed in the United States of America, Canada and Mexico. use and service. If repair or replacement is not practical, Delta Faucet Company may elect to DELTA FAUCET COMPANY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR refund the purchase price in exchange for the return of the product.