I Ceiling-Mounted Type (T Type); Required Minimum Space For Installation And Service - Sanyo 85464359982001 Installation Instructions Manual

07-007 W-2WAY_II_NA 1/23/07

I Ceiling-Mounted Type (T Type)

3-24. Required Minimum Space for Installation and Service

(1) Dimensions of suspension bolt pitch and unit
Table 3-6
Dimension
A
Type
12, 18 33-21/32 35-53/64 8-17/64
24 44-19/64 46-29/64 8-17/64
(2) Refrigerant tubing • drain hose position
Left side
T
9-7/8
Closed with rubber stopper at time of shipment.
(3) Unit opening position (Refrigerant tubing • drain hose • power inlet port • remote controller wiring inlet port)
Left-side drain hose
outlet port
*1
Side panel
*
1 Use a compass saw, jig saw or similar tool and cut along the indented portion of the side panel.
6:09 PM Page 46
Unit: in.
B C
Rear (figure shows view from front)
2-23/64
3-5/16
Left drain position
Rear outlet port
Inter-unit control wiring
(ø1-3/16", knock-out, use rubber grommet)
Outside air intake duct connection port
"
(ø3-15/16 , knock-out)
Power supply outlet
"
(ø1-3/16 , knock-out)
Rear tubing hole
Left-side drain
3-5/16
hose outlet port
B
Ceiling side
1-5/64 A
(Suspension bolt pitch)
Fig. 3-87
2-21/64 3-61/64
2-61/64 3-13/16
9/64
Liquid
tubing
Gas tubing
5-3/4
Right drain position
Fig. 3-88
10-5/16
4-59/64 2-53/64
13-21/32
Unit: in.
Fig. 3-89
46
C
Air intake
1-5/64
Air outlet
Right side
8-1/2
(Liquid tubing •
Gas tubing)
6-11/32
9-7/8
Unit: in.
Right-side drain
hose outlet port
*1
Side panel Position of plate
inside side panel
Unit: in.