Pc With Ethernet Adapter; Connecting To Pc - D-Link DWR-953 Quick Installation Manual

DWR-953

CONNECTING TO PC

PC with Ethernet Adapter

1. Connect an Ethernet cable between any of LAN ports located on the back
panel of the router and the Ethernet port of your PC.
2. To connect via built-in LTE modem: insert a SIM card into the slot on
the right side panel of the router with the gold contacts facing towards the
front of the device and gently push until it clicks.
If you need to connect a SIM card or change it to another one when the
!
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. Turn on the router by pressing the ON/OFF button on its right side panel.
Then make sure that your PC is configured to obtain an IP address
automatically (as DHCP client).
Quick Installation Guide
5