Overview Of Status Pages - Extended Mode - Wolf BM-2 Operating Instructions For User

6

Overview of status pages - extended mode

9 - Heating appliance
10 - DHW
11 - Heating circuit
12 - Mixer
13 - Solar
14 - Ventilation unit
15 - Messages
12
Overview of status pages - extended mode
Turn the rotary selector to display the different status pages. This enables the installed
heating appliances and extension modules with the associated configurations.
Setting options
− Once-only DHW heating
− Emissions test mode
(BM-2 in heating appliance)
− Call up home page
Setting options
− Change set DHW temperature
− Change operating mode
− Call up home page
Setting options
− Change set heating circuit temperature − Selected temperature
− Change operating mode
− Call up home page
Setting options
− Change set mixer circuit temperature
− Change operating mode
− Call up home page
Display
− Monthly yield
− Annual yield
Setting options
− Change operating mode
− Call up home page
Setting options
− Acknowledging faults for users
− Acknowledging faults for contractors
(locking faults)
Only values from connected modules and heating appliances are
displayed.
Info regarding system data
− Operating mode
− Burner status
− Heating appliance temp.
− System pressure
− Burner output
Info regarding system data
− Selected DHW temperature
− Selected operating mode
− DHW temp.
− Set DHW temperature
Info regarding system data
− Selected operating mode
− Room temperature
(BM-2 as remote control)
− Outside temperature
(with outside temp. sensor in
WRS)
− Flow temperature
Info regarding system data
− Selected temperature
− Selected operating mode
− Room temperature
− Outside temperature
− Flow temperature
Info regarding system data
− Collector temperatures
− Cylinder temperatures
Info regarding system data
− Selected operating mode
− Air flow rate / extract air temp.
Info regarding system data
− Current faults
3064202_201602