Sanitaire 880 Series Owner's Manual

Commercial upright vacuum cleaner
Hide thumbs Also See for 880 Series:

Advertisement

Quick Links

P L EA SE R ETA IN
We suggest you record the model, type and serial
numbers below. They are located on the silver rating
plate on your cleaner. For prompt and complete
service information, always refer to these numbers
when inquiring about service.
Model & Type
Serial No.
It is also important to keep your receipt as proof of
date of purchase.
Part No. 72926A
(8/04)
©2004 Electrolux Home Care Products Ltd.
Commercial Upright

Vacuum Cleaner

680 and 880 Series
Ownerʼs Guide
IMPORTANT
Do not return this product to
the store. Call 1-800-800-8975*
Monday - Friday, 8 am to 7:30
pm CST and 10 am to 6:30 pm
Saturday or visit our web site,
www.sanitairevac.com for any
of the following:
• assembly problems
• replacement of broken or missing
items
• to order replacement parts and
accessories
• to view repair parts list
• to locate the nearest Sanitaire
Warranty Station
*En Mexico llame al 5670-6169.
www.sanitairevac.com
with
®
DUST BAG
Printed in U.S.A.

Advertisement

Table of Contents
loading

Summary of Contents for Sanitaire 880 Series

  • Page 1: Vacuum Cleaner

    • assembly problems • replacement of broken or missing items • to order replacement parts and accessories • to view repair parts list • to locate the nearest Sanitaire Warranty Station *En Mexico llame al 5670-6169. www.sanitairevac.com Printed in U.S.A. with...
  • Page 2: Table Of Contents

    The instructions in this booklet serve as a guide to routine maintenance. For additional service information telephone our toll free number for the nearest Sanitaire Authorized Warranty Station. You should know the model, type and serial numbers when you call:...
  • Page 3: Assembly

    (B), 2 bellows screws (C) and 1 cord clamp with a screw (D). An extra belt is included with some models. Assembly Packet for 880 Series The assembly packet contains two 2-part handle bolts (E), 2 cord hooks (F), 2 bellows screws (G) and 1 cord clamp with a screw (H). An extra belt is included with some models.
  • Page 4: Cord Storage

    Raise the dust cup support. Push the lower handle (largest end down) through the tube of the dust cup support and into the handle socket at the back of the cleaner. Make sure the notches on the lower handle face the rear of the cleaner (Fig. 1).
  • Page 5: Use

    Cleaner Care With the tip of the foot, To keep the vacuum cleaner looking new, it can be wiped with press down to release a damp cloth and a mild soap solution, then thoroughly dried.
  • Page 6: Fan Chamber

    7. Place the cup into the support, swing the lid shut, and fasten each latch. 8. Hook clip to top of bag (refer to item 1). Quick Kleen® Fan Chamber (880 Series Only) NOTE: Turn off the switch and unplug the electrical cord before cleaning. The clear, removable fan chamber...
  • Page 7: Brush Roll Belt

    12 inch No. 52282; 16 inch No. 52246-1 Brush Roll Belt The brush roll belt on the upright vacuum cleaner drives the brush to agitate, sweep, and comb the carpet nap. The belt should be checked regularly to be sure it is in good condi- tion.
  • Page 8: Warranty

    Please fill out and return the warranty registration card accompanying your cleaner. To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Sanitaire Authorized Warranty Station. You will find the nearest location in the Yellow Pages under “Vacuum Cleaners–Service and Repairʼ.

This manual is also suitable for:

Ezkleen 680 seriesEzkleen 880 series

Table of Contents