LG G6 User Manual page 180

Safety
178
Communications Devices: Experimental Techniques, " sets forth the first
consistent test methodology for measuring the rate at which RF is
deposited in the heads of wireless device users. The test method uses a
tissue-simulating model of the human head.
Standardized SAR test methodology is expected to greatly improve the
consistency of measurements made at different laboratories on the same
device. SAR is the measurement of the amount of energy absorbed in
tissue, either by the whole body or a small part of the body. It is measured
in watts/kg (or milliwatts/g) of matter. This measurement is used to
determine whether a wireless device complies with safety guidelines.
9. What steps can I take to reduce my exposure to Radio Frequency
energy from my wireless device?
If there is a risk from these products — and at this point we do not know
that there is — it is probably very small. But if you are concerned about
avoiding even potential risks, you can take a few simple steps to minimize
your exposure to Radio Frequency (RF) energy. Since time is a key factor in
how much exposure a person receives, reducing the amount of time spent
using a wireless device will reduce RF exposure. If you must conduct
extended conversations by wireless device every day, you could place more
distance between your body and the source of the RF , since the exposure
level drops off dramatically with distance. For example, you could use a
headset and carry the wireless device away from your body or use a
wireless device connected to a remote antenna. Again, the scientific data
does not demonstrate that wireless devices are harmful. But if you are
concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from
wireless device use.
10. What about children using wireless devices?
The scientific evidence does not show a danger to users of wireless
devices, including children and teenagers. If you want to take steps to lower
exposure to Radio Frequency (RF) energy, the measures described above
would apply to children and teenagers using wireless devices. Reducing the
time of wireless device use and increasing the distance between the user