Operation On Call Log - GE 22428 User Manual

Press [Menu/ ] or [ /
If the caller information for an entry has been read before, the 'CLI' icon will not appear.
0 3 - 2 6 7 8 1 3 4 5 7
If the caller's number is too long to be seen at once, pressing [Menu/ ] will show the unseen content
on the right.
If date-time information is available, user may press [Menu/ ] to view the date-time information
(MM/DD hh:mm , 24
MM / D D h h : m m

Operation on call log

To operate the caller ID number from call log, choose 'CALL LOG' to enter the call log first.
During viewing any type of call log, press [
During viewing 'missed' or 'received' caller ID, Press [INT / OK] to operate it. Two kinds of
operations are provided as shown.
D E L E T E
S A V E
Then, user could browse a sub-menu by pressing [Menu/ ] or [ /
the selected operation.
If 'DELETE' is selected, after a confirm tone, the next entry will come out. If no entry is to be
deleted, LCD shows 'EMPTY' and then returns to up level menu after 2 seconds.
If 'SAVE' is selected, if phone book space is full, a warning tone will be heard with the below display
and then returns to up level menu after 2 seconds.
P B F U L L
If phone book space is not full, the selected call log entry will be saved to phone book as shown.
S T O R E D
If the current call log entry match phone book, it can't be saved to phone book with prompt of
] to view the next or previous caller ID information.
hour) located at the end of the current call log entry.
] and the viewed number will be dialed out.
25
]. Press [INT / OK] to execute