Vaillant auroTHERM VFK 145 H Installation Manual page 8

4 On-roof fitting and installation
4.1.1.2 Checking the scope of delivery
15
14
10
13
12
11
10
List of materials for on-roof installation
1 Rail mounting set, vertical, 2 units
Rail mounting set, horizontal, 2 units
2 Flow (outlet with opening for collector sensor) from set of
hydraulic connections, 1 unit
3 Roof bracket type P (for pantile) from the basic set,
4 units
Roof bracket type P (for tile) from extension set, on top of
each other, 2 units
4 Roof bracket type S (for beaver tail, etc.) from the basic
set, 4 units
Roof bracket type S (for beaver tail, etc.) from extension
set, on top of each other, 2 units
5 Roof bracket type S, flat, (for beaver tail, etc.) from the
basic set, 4 units
Roof bracket type S, flat (for beaver tail, etc.) from exten-
sion set, on top of each other, 2 units
▶ Use the illustration to check that the installation sets are complete.
Note
Not all roof bracket types are available in all countries.
8
6 Hanger bolt fastening set from the basic set, 4 units
Hanger bolt fastening set from extension set, on top of
each other, 2 units
7 Hydraulic connections from hydraulic extension set,
2 units
8 Clamp from hydraulic extension set, 4 units
9 Return (inlet) from hydraulic connections set, 1 unit
10 Top and bottom plugs (with vent opening) from set of
hydraulic connections, 2 units
11 Rail connector from hydraulic extension set, 2 units
12 Long base, hook type P, 4 units
13 auroTHERM VFK 145/2 V collector, 1 unit
auroTHERM VFK 145/2 H collector, 1 unit
auroTHERM VFK 155 V collector, 1 unit
auroTHERM VFK 155 H collector, 1 unit
14 Clamp from hydraulic connections set, 4 units
15 Pipe connector (only for horizontal collector), 1 unit
Installation manual auroTHERM, auroTHERM plus 0020100571_03
1
2
3
4
5
6
7
8
9