Nokia E52 User Manual page 79

WLAN indoors. For more information, contact your local
authorities.
See WLAN availability
To set your device to show wireless LAN (WLAN) availability,
select Menu Ctrl. panel Settings and
> >
Wireless LAN Show WLAN availability.
>
If a WLAN is available, is displayed.
WLAN wizard
Select Menu Ctrl. panel Connectivity
> >
The WLAN wizard helps you find and connect to a wireless
LAN (WLAN). When you open the application, your device
starts to scan for available WLANs and lists them.
Select Options and from the following:
Refresh — Update the list of available WLANs.
•
Filter WLAN networks — Filter out WLANs in the list of
•
found networks. The selected networks are filtered out the
next time the application searches for WLANs.
Start web browsing — Start browsing the web using the
•
access point of the WLAN.
Cont.web browsing — Continue web browsing using the
•
currently active WLAN connection.
Disconnect WLAN — Disconnect the active connection to
•
the WLAN.
Details — View the details of the WLAN.
•
www.nokia.com/support
Cyan Cyan
Important: Always enable one of the available
encryption methods to increase the security of your wireless
LAN connection. Using encryption reduces the risk of
unauthorised access to your data.
Use the WLAN wizard in the home screen
Connection
>
In the home screen, the WLAN wizard shows the status of
your WLAN connections and network searches. If the WLAN
wizard is not activated by default in the home screen, you can
activate it in the home screen settings. To view the available
options, select the row showing the status. Depending on the
status, you can start the web browser using a WLAN
connection, connect to your net call service, disconnect from
WLAN wiz..
>
a WLAN, search for WLANs, or enable or disable network
scanning.
If WLAN scanning is disabled, and you are not connected to
any WLAN, WLAN scanning off
screen. To enable WLAN scanning, and to search for available
WLANs, select the row showing the status.
To start a search for available WLANs, select the row showing
the status and Search for
To disable WLAN scanning, select the row showing the status
and Switch WLAN scan
When Start web browsing
wizard automatically creates an access point for the selected
WLAN. The access point can also be used with other
applications requiring WLAN connection.
If you select a secured WLAN, you are asked to enter the
relevant passcodes. To connect to a hidden network, you
must enter the correct service set identifier (SSID).
Magenta Magenta Yellow Yellow Black Black
is displayed in the home
WLAN.
off.
or Use for is selected, the WLAN