Panasonic BL-C20 Important Information

Important Information

Network Camera
BL-C20
Model No.
Please read this manual before using, and save this manual for future
reference.
Trademarks
• Microsoft and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
• Pentium is a trademark or registered trademark of Intel Corporation or its
subsidiaries in the United States and other countries.
• All other trademarks identified herein are the property of their respective
owners.
Abbreviations
• "Network Camera" is called "camera" in this manual.
• "Setup CD-ROM" is called "CD-ROM" in this manual.
Obstacles during Wireless Connection
The radio wave range may decrease depending on the surrounding
environment or existence of obstacles. If obstacles such as the following
are placed between a camera and a router, radio waves will weaken.
Therefore, even if the distance between the camera and router is short, the
frame rate may decrease or images may not be displayed.
A metallic door or shutter
•
A wall with an insulation material that contains aluminum foil
•
A wall made of tin
•
A wall made of concrete, stone or brick
•
Fireproof glass
•
Several walls separated by open space
•
A steel shelf
•
System Requirements for your PC
Your PC (Personal Computer) and network must meet the following
technical specifications for the camera to work properly.
Item
Microsoft ® Windows
Operating
®
Microsoft Windows
System
Microsoft ® Windows
CPU Pentium ® III (500 MHz or greater is recommended.)
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
Protocol
10/100 Mbps network card installed
Interface
Web Browser Internet Explorer 6.0 or later (Not included on the CD-ROM)
Note
See Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for details about
network environment.
Environment:
Do not install the camera where the temperature is less than +5 ˚C or greater than +40 ˚C. Allow 10 cm clearance around the unit for proper ventilation.
Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.
When you leave the unit unused for a long period of time, disconnect the AC adaptor from the power outlet.
If you have any problems:
Consult an authorized service center.
CAUTION:
• This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between
antenna and all person's body (excluding extremities of hands, wrist and feet) during wireless modes of operation.
• This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
• Medical
Consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radio
frequency) energy. (The unit operates in the frequency range of 2.412 GHz to 2.472 GHz, and the power output level is 0.1 watts.) Do not use the unit in
health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could
be sensitive to external RF (radio frequency) energy.
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
No responsibility will be taken by our company with respect to consequences resulting from the use, damage or both of the camera.
Video Recording Notice:
PLEASE NOTE that under certain circumstances, video recording may be PROHIBITED by law. This device should be used only in compliance with all
applicable federal, state and local statutes.
2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX14968ZA KK0206YR0 (CE)
Indoor Use Only
Description
® XP (Home Edition, Professional),
® ® ®
2000, Microsoft Windows Me,
® 98SE
How to Use This Documentation
The Network Camera includes the following 4 manual types.
• Important Information (This manual)
This manual has important information you will need to understand
before installing.
• Getting Started
Getting Started explains the initial configuration and mounting methods
of the Network Camera, to help you to set up the Network Camera
quickly and easily.
• Operating Instructions (Included on the Setup CD-ROM)
Operating Instructions explains the operations, settings, features and
maintenance of the Network Camera.
• Troubleshooting (Included on the Setup CD-ROM)
Troubleshooting provides troubleshooting help.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. To clean the camera lens, first remove any dust or dirt from the
lens, then wipe the lens with a cotton bud.
6. Do not block any ventilation openings. Install in accordance with
instructions.
7. Do not install near any heat sources such as radiators, heat
registers, stoves, or other devices (including amplifiers) that
produce heat.
8. Protect the AC adaptor cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the unit.
9. The AC adaptor is used as the main disconnect device. Ensure
that the power outlet is located/installed near the equipment and is
easily accessible.
10. Only use attachments/accessories (such as stands) specified by
the manufacturer.
11. Do not touch the unit, AC adaptor, or AC adaptor cord during
lightning storms.
12. Unplug the unit when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is
required when the unit has been damaged in any way, such as the
AC adaptor is damaged, the unit does not operate normally, or has
been dropped.
14. The camera is intended for indoor use only. Prolonged exposure to
direct sunlight or halogen light may damage the CMOS sensor.
15. Please check local regulations as outdoor use of the wireless
feature is restricted in some countries/areas.
16. Unplug this unit from power outlets if it emits smoke, an abnormal
smell or makes unusual noise. These conditions can cause fire or
electric shock. Confirm that smoke has stopped and contact an
authorized service center.
SAVE THESE INSTRUCTIONS