Appendix C; How To Use Console - Samsung Version 1.1 Owner's Manual

Samsung web transmitter owner's manual
Table of Contents

Advertisement

APPENDIX C How to Use Console
Console allows condition check-up of SNS-110 by connecting to RS-232C port, manually setting network-
related information.
Starting Console
(1) Connect to RS-232C port on the PC in accordance with "Connecting to RS-232C" of "Chapter 3,
Connecting other equipments"
(2) Use Terminal Emulation (Hyper Terminal) from the connected PC to set the values for RS-232C
through Terminal Emulation.
(3) The following message will appear when you turn on the power of SNS -110.
Message
(1) When the power is turned on, the following message will appear on the console screen when
SNS-110 has been successfully installed.
########################################################
#
#
SAMSUNG Electronics. Co., Ltd.
#
webTX(Internet Video Server):SNS-110
#
Version1.1(2000~2001) All Rights Reserved.
#
########################################################
>Current status is Flash Memory Boot
>To change system parameter, press any key within 2 seconds
....IP:168.219.13.11
3, SM:255.255.255.192, GW:168.219.13.65
>Web Transmitter Image Loading<
>Ethernet(MAC) address in Cookie : [00-00-f0-ff-a1-ba]
>Network parameters in gstrIP, gstrSubnetMask, gstrGtwyIP
-IP:168.219.13.113 SM:255.255.255.192 GW:168.219.13.65
>Network Interface Installed
>DNS IP address is empty or invalid
************************* HttpPort = [80]
************************* FTP port = [21]
Initializing External Devices... (f_InitExtDev())
EXTACON0 = 06110a59, EXTACON1 = 00000000
Timing COS/ACS/COH/ACC : 1315 1203 0000 0000
init universal timer(#1), 1ms period
system has 4 decoder(s).
all decoders/channels are reset.
rtc init step skipped.
Rtc time : 2001/1/1 [Mon] 04:06:17
reflected os time : 2001/01/01 04:06:17
JpegRESET: write reg 0 <- 0 fail. a0 read
Jpeg reset ok.. loading..
Jpeg header size : 591 (0x24f) bytes
#
#
#
#
#
68
If any key is pressed within two
seconds, manual setup mode
will appear.
Indicates Ethernet address
Indicates IP address, Subnet
Mask, and Gateway
Indicates the time elapsed with
SNS-110

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sns-110

Table of Contents