Rear Panel View; Where To Install Your Mini-Compact System; Connecting Your System To The Power Supply - Samsung MAX-VS940 Instruction Manual

Rear Panel View

GB
1. SW Aerial Connector Terminal (OPTION)
2. AM Aerial Connector Terminals
3. AUDIO(DISC) Output Connectors
4. VIDEO(DISC) Output Connectors
5. FM Aerial Connector Terminal
6. Digital Out (option)
7. Sub woofer Control Jack(MAX-VS940/VS990)
8. AUX-Input
9. Surround Speaker Connector Terminals
(MAX-VS950/VS990)
10. Sub woofer Speaker Connector Terminals
(MAX-VS940/VS990)
11. Front Speaker Connector Terminals
12. Voltage Selector (OPTION)
6
Where to Install Your
Mini-Compact System
To take full advantage of your new mini-compact system,
follow these installation instructions before connecting the
unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
1
Maintain an open space of approximately 6 inches (15 cm) on the
2
sides and rear of the system, for ventilation purposes.
3
4 Make sure that you have enough room to open the compact disc
5
compartment easily.
6
Place the loudspeakers at a reasonable distance on either side of
7
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
8
For optimum performance, make sure that both speakers are placed
9
at an equal distance above the floor.
10
11
12
Connecting your System to the
Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage setting (OPTIONAL). If the voltage of the socket does
not correspond to the setting on the rear of the unit, you may
seriously damage your system.
1
Check the position of the Voltage selector on the rear of the system
(OPTIONAL).
2
Plug the main lead (marked AC Cord on the rear of the system) into
an appropriate socket.
3
Press the ECO/STANDBY/ON button to switch your mini-compact
system on.
/