Advertisement
2.
Further
rotation
in
the
tion
will
draw
it
forward
ter-clockwise
rotation
draws
3. Push the ring counterweight onto the long coun-
terweight and secure it with the hexagonal key half-
way along the long counterweight.
Fitting the Headshell and Cartridge
1. Read the cartridge maker's instructions carefully.
If a stylus guard is fitted, do not remove it at this stage.
Cartridges weighing 4 to 15 grams may be used.
2. Two lengths of screw are provided; secure the
cartridge with the better length as shown. Only
tighten the nuts just enough to prevent movement.
3. Note the coding of the colored headshell leads:
one stereo pair is Red/Green and the other is White/
Blue. A small pair of tweezers will be invaluable
in
attaching
the
metal
cartridge
4. Push the headshell assembly into the tone-
arm
socket,
and
gently
"sleeve" until it grips the headshell in position.
5. Slightly slacken the screws retaining the
cartridge and slide it backward or forwards until
the stylus tip is exactly in line with the overhang
setting mark as shown. This is an extremely
important
adjustment.
Finally,
screws sufficiently to prevent movement, taking
care to keep the cartridge parallel with the
headshell.
Do
NOT
use
6. The stylus guard may be removed at this point.
clockwise
direc-
smppthly,
coun-
it
backwards.
sleeves
to
the
connectors.
turn
the
locking
tighten
the
excessive
force.
6
Hide quick links:
Advertisement
