Logic Editor; Creating The Logic In The Codesys Programming Environment - ABB COM600 series 5.1 User Manual

3.3.
3.3.1.
16
COM600 series 5.1
Logic Processor User's Manual
Figure 3.2-1 Adding a Logic Processor IED

Logic editor

Creating the logic in the CoDeSys programming environment

Logic Processor IED must be added to the communication
structure before starting the Logic Processor CoDeSys pro-
gramming environment.
To launch the CoDeSys programming environment:
1. Right-click the Logic Processor IED object and select Logic Editor.
The CoDeSys programming environment will start as a new application instance.
2. Select CoDeSys from the taskbar.
If this is the first time to launch CoDeSys, an empty project with the same name as
the SAB600 project will be opened. If a project has already been saved, the saved
project will be opened. In the new default project, device CoDeSys Control Win V3
has already been added, and it should not be changed. A default POU (Program
Organization Unit) PLC_PRG is already available in the structure tree, under
Application.
1MRS756738
Add_Logic_Processor_IED.bmp