Product Overview; About The Sensor Units - Axis FA54 User Manual

AXIS FA54 Main Unit

Product overview

Product overview
1
Status LED
2
RJ12 connector (4x)
3
HDMI
4
Audio in (2x)
5
Audio out
6
I/O connector
7
Power connector
8
Network connector (DC input)
9
Control button
10 microSD card slot

About the sensor units

We recommend that you connect the sensor units to the main unit before powering the main unit. If you disconnect a sensor unit,
and connect a different sensor unit, it may be necessary to restart the main unit.
How to shorten the sensor unit cable
Note
• The sensor unit cable cannot be extended or split.
• When routing the sensor unit cable, the minimum bending radius is 40 mm.
The sensor unit is delivered with a cable. To shorten the cable follow these steps:
1. Cut the cable to the desired length. Measure from the sensor unit.
2. Strip the plastic outer coating from the end of the cable.
3. Peel back the shield.
4. Flatten the colored wires in the order described below.
1
Brown
2
White/brown
3 Not used
4
Not used
4