MODEL: 1651901 Blain's ASSEMBLY INSTRUCTIONS ATTENTION DO NOT RETURN TO THE STORE Contact MD Sports Customer Service * For additional resources and Frequently Ask Questions, please visit us at themdsports.com...
Page 2
1 - Please leave your name, address, phone number, model number, parts needed on the answering machine if there is no attendance. Failure to do so will result in a delay in shipping parts to you. 1651901 (Continued on the next page.)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTICE! WARNING: WARNING: WARNING: ’ 1651901 (Continued on the next page.) www.themdsports.com...
Page 4
1651901 PARTS LIST PLAYER 1 TIME PLAYER 2 ON/OFF PLAYER START Mainframe Bolt Target Board Hanger Dart Blaster 1651901 PRE-INSTALLED PARTS Target - A Target - B Note: Mainframe (#1) and Darts (#6) is not available as a replacement part.
Page 5
3. Attach the Target Board (#4) to the Mainframe (#1) as shown in FIG. 1. FIG. 2 X 10 Phillips Screwdriver - Not Included FIG.2 4. Attach the Hanger (#2) to the Mainframe (#1) using two Bolts (#4) as shown in FIG. 2. 1651901 (Continued on the next page.) www.themdsports.com...
Page 6
Spring Lock FIG.3 5. Hang the Skeet Shooting set on the door, press the spring lock and pull the support of the Hanger (#2) to adjust the height as shown in FIG. 3A. 1651901 www.themdsports.com (Continued on the next page.)
Page 7
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. YOU ARE NOW READY TO PLAY! 1651901 (The last page) www.themdsports.com...