Related Manuals for Samsung SCC-B2035P
Summary of Contents for Samsung SCC-B2035P
-
Page 1: User Manual
DIGITAL COLOR CAMERA user manual imagine Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.com the possibilities SCC-B2335(P) SCC-B2035P... -
Page 2: Safety Information
fi re or electric shock. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) 2 –... - Page 3 When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock. CAUTION Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference.
-
Page 4: Important Safety Instructions
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi... -
Page 5: Table Of Contents
Introduction Features PRODUCT & ACCESSORIES Part Names and Functions Installation Connecting the Auto Iris Lens Connector Mounting the lens Connecting cables and checking operation How to use OSD Menu Using Icons in the Menu Main Menu Camera Setup Intelligence Privacy zone Setup Other Set Communication System Information... -
Page 6: Introduction
Introduction FEATURES ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ VPS(Virtual Progressive Scan) • This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and fi... -
Page 7: Product & Accessories
PRODUCT & ACCESSORIES ❖ Product & Accessories • Main Product • Accessories C Mount Adapter Camera Holder(Mount) Introduction Camera User’s Manual Auto Iris Lens Connector English –... -
Page 8: Part Names And Functions
Introduction PART NAMES AND FUNCTIONS ❖ Side View Auto Iris Lens Connector Auto Iris Lens Control Cable • Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. •... - Page 9 Introduction ❖ Rear Panel <AC24/DC12V (SCC-B2335(P))> <AC220V~240V(SCC-B2035P)> English –...
- Page 10 Introduction Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. Function ALARM OUT TRIGGER IN SHUTTER (S0) SHUTTER (S1) SHUTTER (S2) 5V OUT DAY/NIGHT IN RS-485 DATA- RS-485 DATA+ SETUP Switch This switch is used to set the function or property.
-
Page 11: Installation
CONNECTING THE AUTO IRIS LENS CONNECTOR Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following DC Control Video Control Type Type Damp(-) Power (+12V) Damp(+) Not applicable Drive(+) Video Signal Drive(-) Note : You can switch a control type of the lens in the menu. -
Page 12: Connecting Cables And Checking Operation
Installation CONNECTING CABLES AND CHECKING OPERATION Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera. Connect another end of the BNC cable to the VIDEO IN Port on the monitor. Video In Terminal of Monitor Rear Surface 1 . -
Page 13: How To Use Osd Menu
How to use OSD Menu USING ICONS IN THE MENU • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) Returns to the previous menu. •... -
Page 14: Profi Le
How to use OSD Menu PROFILE PROFILE STANDARD BACKLIGHT DAY/NIGHT GAMING CUSTOM In the PROFILE menu, you can confi gure the following camera settings at once. CAMERA SET Menu STANDARD Previous Sub-menus Menu IRIS LENS LEVEL BACKLIGHT User setting WEIGHT User setting WDR LEVEL User setting... - Page 15 How to use OSD Menu CAMERA SET Menu STANDARD Previous Sub-menus Menu WHITE BAL MODE ATW2 BLUE NIGHT User setting BRIGHTNESS allowed MODE User setting allowed User setting BLUE allowed DETAIL ❖ It will be set automatically so you can easily check the traffi c conditions. ❖...
-
Page 16: Camera Setup
How to use OSD Menu CAMERA SETUP CAMERA SET CAMERA ID IRIS MOTION (F.FAST)--- SHUTTER SENS-UP AUTO X4 FLICKERLESS (OFF)--- DAY/NIGHT AUTO WHITE BAL DIGITAL ZOOM DETAIL V-SYNC AGC COLOR SUP REVERSE POSI/NEGA Setup the general functions of zoom camera module. Use the switch to select a menu item. - Page 17 How to use OSD Menu For normal operation, you must select DC for a DC-type lens, and select VIDEO for a VIDEO- type lens. The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area.
- Page 18 How to use OSD Menu ❖ [OFF, VERY LOW, LOW, MID, HIGH, VERY HIGH, USER, FIX] The AGC (Auto Gain Control) menu is used to set the AGC level of the camera. When the AGC is active, the camera automatically increases the sensitivity by amplifying the Video signal when the strength of the signal falls below the normal value.
- Page 19 How to use OSD Menu mode. When it gets brighter back, the mode will switch to the fi xed high speed electronic shutter mode. However, the auto high speed shutter operates properly only in a camera featuring a DC or VIDEO lens.
- Page 20 How to use OSD Menu ❖ XDR (eXtended Dynamic Range) [OFF, LOW, MID, HIGH] Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility. Select one from OFF, LOW, MID and HIGH. Closing to HIGH will increase the compensation level.
- Page 21 How to use OSD Menu • This enables an auto switch between DAY and NIGHT mode using the interface with the external sensor. ❖ WHITE BAL [DAY/NIGHT] If you want to adjust the color scheme, use the WHITE BALANCE function. •...
- Page 22 How to use OSD Menu ❖ DIGITAL ZOOM [ON/OFF] You can set the digital zoom factor and position. If you press the SETUP switch with the DIGITAL ZOOM function set to ON, you will see the appropriate screen. When the zoom factor and position are defi ned, the digital zoom function will operate.
-
Page 23: Intelligence
How to use OSD Menu INTELLIGENCE INTELLIGENCE MOTION ADVANCED MASK AREA DISPLAY SENSITIVITY RESOLUTION ALARM OUT You can set the motion detection and tracking in the INTELLIGENCE menu. ❖ MOTION [OFF,TRACKING,DETECTION] • TRACKING Detects and tracks a moving object. • DETECTION Detects a moving object. - Page 24 How to use OSD Menu - How to set the area AREA PIXEL LEVEL <SIZE> <LOCATION> If you press the SETUP switch with the AREA option set to ON, you can specify the position and size of the area. If you change the PIXEL LEVEL for setting the position, specify the pixel that moves by a single pressure of the In <SIZE>, press the SETUP switch and use...
-
Page 25: Privacy Zone Setup
How to use OSD Menu PRIVACY ZONE SETUP PRIVACY ZONE PRIVACY SET STYLE MOSAIC1 The PRIVACY function will protect your privacy by screening the privacy area that you have specifi ed during monitoring. You can specify up to 12 privacy zones. -
Page 26: Other Set
RS-485 network. To control a specifi c camera, you must match the address of the camera with that of the DVR or the controller. COMMUNICATION PROTOCOL SAMSUNG BAUD RATE 9600 ADDRESS [Camera I/O Connector] switch to specify the protocol,... -
Page 27: System Information
How to use OSD Menu SYSTEM INFORMATION SYSTEM INFO TYPE 3_BOX_WDR_N PROTOCOL SAMSUNG ADDRESS COMM. TYPE RS-485,HALF BAUD RATE SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 EEPROM VER. 0.50_090101 You can view the system information including the protocol, address, baud rate, serial number, camera version, and EEP version. -
Page 28: Specifi Cations
Specifi cations SPECIFICATIONS Items Camera Type Image Pixels System Scanning Line Frame Scanning Horizontal Frequency Vertical Frequency Min. Scene Illumination Number of Privacy Zone Motion Detection eXtended Dynamic Range(XDR) Wide Dynamic Range(WDR) Virtual Progressive Scan(VPS) High Speed Shutter Functions White Balance Digital Noise Reduction(DNR) Digital Image Stabilization(DIS) Intelligent Video... - Page 29 Items Sub-items Horizontal Resolution Vertical Video Output S/N Ratio S/N Ratio Lens Drive Type Lens Mount Type Input Alarm Output Coaxitron (Data On Coax cable) Remote Control RS-485 Operating Temperature Environmental Conditions Humidity Power Requirement Power Power Consumption (With DC Lens) LED Indicator Dimensions (WxHxD)
- Page 30 512 times 512 times 512 times Day/Night D-Zoom Flickerless Sens-Up Line Lock Camera ID Etc. Function SCC-B2335P / SCC-B2035P 1/3” Super-HAD PS CCD 795 x 596 752 x 582 Interlace/Progressive 625 lines 25 frame/1sec 15,625 Hz 15,625 Hz 50 Hz 50 Hz Min.
- Page 31 In switching the DAY/NIGHT fi lter : SCC-B2335P :3 .2W SCC-B2035P : 3.8W SCC-B2335P : 64(W) x 58(H) x 109.2(D) mm SCC-B2035P : 64(W) x 58(H) x 129.2(D) mm Package 173(W) x 99(H) x 115(D) mm SCC-B2335P : Approx. 305g SCC-B2035P : Approx.
- Page 32 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.