Table of Contents
Advertisement
30X PTZ Network Camera SNP-3300
Problem
The MOTION
DETECTION function is
not working.
When camera cannot
be controlled for Pan/
Tilt/ Zoom
Colors are not quite
right.
The screen is
flickering.
L/L mode isn't able to
be selected.
DAYNIGHT(Auto) mode
is not working.
SENS-UP function is
not working.
96
Solution
Please check if 'MOTION
DETECTION' mode is turned on.
Please check if the MD LEVEL is too
low.
Please check the setting of the MD
AREA.
Inspect the cables(power or network)
connected to the device.
Connect to Admin page to check
whether user control is selected.
Please
check
setting.
Please check if the camera is facing
directly into sunlight or fluorescent
light.
Please check the frequency of power
supply (60Hz for NTSC, 50Hz for
PAL).
Please check if the AGC menu is set
to the OFF position.
Please check if the AGC menu is set
to the OFF position.
Please check if the SHUTTER menu
is set to MANUAL mode.
Please check the limit of SENS-UP
AUTO mode.
the
'WHITE
BAL'
Hide quick links:
Advertisement
Table of Contents
