First Data FD130 Duo Getting Started Manual

Basic Operations
Continued
Tip Adjustment:
This adds the tip amount to a transaction in the
current batch.
To enter a tip:
1) From the home screen, press "Other".
2) Select "Enter Tips".
3) Enter the SEQ# (from the receipt).
4) Press "Edit Tip".
5) Enter the tip amount.
6) Receipt will automatically print out for your customer,
and the sale has been completed.
Settlement:
At the end of each day you can settle the batch for
payment and clear your terminal of transaction information.
If your terminal preferences were setup with auto-close,
this step is not required. Instead, the settlement process
and reports will print automatically each day/night as
scheduled. To settle the batch,
1) From the home screen, press "Other".
2) Select "Close Batch".
3) Review the screen then select "OK" to confirm.
4) Your terminal will connect to the internet and complete
the batch settlement.
For more information or if you have questions, go to
www.businesstrack.com/terminalguides
help desk at the number on the sticker on your device.
85751 0615
or contact your
Getting Started
Learn how to use your terminal in a few easy steps.
Notice
Before plugging in your terminal, please connect all
cables so that you don't accidentally damage the unit
or connected devices.
Step 1: Connect to the Internet
To use your terminal you'll need to be connected to the
internet. You can use an IP connection (DSL or Cable),
Wi-Fi, or a dedicated phone line for dial-up.
Router Modem
Step 2: Add an (optional) Device
If you have optional devices like the FD35 PIN pad or
MagTek MiniMICR Check Reader, you'll need to connect
®
them to either the USB or COM ports.
Phone Connector
Cable or
DSL
Outlet