Installation Instructions; Installation Of The Refrigerator - Samsung RS275 Series Owner's Manual And Installation

INSTALLATION OF THE REFRIGERATOR

Checking the Dimensions of your Entrance Door
Check the dimensions of your entrance door to determine whether the refrigerator can pass through it.
Capacity (Cu. Ft)
Case Height
Dimension
(inches)
Depth
Selecting the Location for the Refrigerator
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location which is not exposed to sunlight.
• Select a location with level floor.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line can be damaged.)
NOTE
• See "Separating the water supply line from the refrigerator" on the next page.
Allow sufficient space to circulate the air in the internal cooling system.
• If the refrigerator does not have enough space, the internal cooling system
may not work correctly.
Allow clearance to the right, left, back and the top when installing the
●
refrigerator. This has the advantage of reducing power consumption.
Do not install the refrigerator where the temperature will go below
●
NOTE
50°F(10°C).
How to assemble the separable door handle
- Make sure the "UP" mark on the rear
of the handle is facing right side up.
- Match the upper and lower Handle
Locking Tabs on the doors to the
handles.
Model
Width
without Hinge
with Hinge
with door
without door
Fix the handles to the doors
by sliding them down firmly.
17
RS275 / RS277
26
1/2
35
7/8
68
1/2
70
33
13/16
30
1/2
2inches
2 inches
0.1inch
- Check the installation of the handles
by pulling them.
- If the handles are inserted properly,
they should not move.