M M e e c c h h a a n n i i c c a a l l D D i i s s a a s s s s e e m m b b l l y y
8-3) Machine Compartment Disassembly
Machine Compartment & & Electric Box
1. Disconnect the power cord of the refrigerator.
2. Remove the fixed screws (6) of compressor
cover.
3. Slide up and take off the compressor cover to
see the machine compartment.
4. Press the tab in electric box cover to take out
by using a flat-blade screw driver.
driver
(-)
Water Solenoids
When the solenoids receive a signal from the micro-
processor, they supply water to the water dispenser
or the ice maker.
1. Remove bracket screw (1) on electric box.
2. Take the solenoids assembly out.
Condenser Fan
machine compartment. It cools down the sub-
condenser and the compressor.
driver
(+)
Sub-condenser
compartment. The heat is extracted by condenser
fan.
PCB-MAIN ASSY
22
3. Disconnect water tubes (3).
The condenser Fan is located in the middle of
1. Disconnect the condenser fan wire.
2. Remove screw (1) on the drain water tray.
3. Take the condenser fan assembly off.
The sub-condenser is located in the machine
1. Desolder the compressor discharge
the sub-condenser outlet.
2. Take out the sub-condenser.
Desoldering Point
&