Adjusting The Clearance Between The Doors; Making Small Adjustments Between Doors - Samsung RS2534BB User Manual

LEVELING REFRIGERATOR
About Leveling first.
NOTE

Making small adjustments between doors.

If the door of the freezer is lower than that of the
refrigerator.
Adjustment part
Please open the doors and adjust then as follows:
1) Release the nut (①) on the lower hinge until it reaches the upper end of the bolt (➁).
When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly
counterclockwise direction. This will enable you to turn the nut(①) loose with your fingers.
NOTE
➂ WRENCH
➀ NUT
➁ BOLT
2) Please adjust the height difference between the doors by turning the bolt (➁) clockwise (
clockwise ( ).
When you turn clockwise (
NOTE
➂ WRENCH
➁ BOLT
3) After adjusting the doors, the nut (①) turn clockwise (
tighten the bolt again with the wrench (➂) to fix the nut(①).
➂ WRENCH
➀ NUT
➁ BOLT
If you do not fix the nut ( ① )firmly, the bolt ( ➁ ) may be released.
NOTE
If the door of freezer is higher than that of the
refrigerator.
), the door goes up.
) until it reaches the lower end of the bolt, then
25
Adjustment part
➂ WRENCH
➀ NUT
➁ BOLT
) or counter
➂ WRENCH
➁ BOLT
➂ WRENCH
➀ NUT
➁ BOLT