Security - LG U8210 User Manual

Settings
Req. Max UL Bitrate
Req. Max DL Bitrate
- Press "Save" key to save any configuration changes.

3.4 Security

You can activate a PIN code. When it is activated, a
window asking you to enter the PIN code appears
when you turn on the phone so as to prevent
unauthorized use of the phone.
3.4.1 PIN code request
You can activate a PIN (Personal Identification
Numeric). You can check the current status of
configuration from the status bar.
PIN request and release procedures
1. Select 'PIN request' item from the list, and press
[Select]. Then a window allowing you to select
'Enable' or 'Disable' appears.
42
Choose the Request Maximum
Upload Bitrate from the list. (Default
is "Subscribed")
Choose the Request Maximum
Download Bitrate from the
list.(Default is "Subscribed")
- Select 'Enable'/'Disable' from the list, press [Select],
and input the current PIN code to set the PIN request.
If 'PIN request' is already enabled/disabled, an
"Already enabled"/ "Already disabled" message will
be displayed.
2. 3 incorrect PIN code entries in the PIN code input
window would invalidate the PIN code. In this case,
you have to input the PUK (PIN Unblock Key) code to
configure the PIN code again.
3. The maximum allowed numeric of attempts of PUK
input is 10 times. 10 occasions of incorrect PUK
entries would limit the mobile phone use.
Press the Back key in the PIN code input window to
return to the previous step.
3.4.2 Handset lock
You can lock your mobile phone to prevent it being
used by other people. The following 4 lock functions
are provided.
- When switching on: Whenever the mobile phone is
turned on.
- If SIM Changed: When the mobile phone's SIM card
has been changed.