Making Ice - Samsung DA99-01906A User Manual

MaKing iCE

- TWIST ICE MAKER MODEL
Making ice cubes
Remove the ice cube tray by pulling it towards you.
Fill the tray with water up to the maximum water level
marked on the rear of the tray.
Slide the tray back into the holder, taking care not to
spill the water.
Wait until the ice cubes are formed.
Freezing time :
It is recommended that you wait for about one hour
with the temperature set to Power Freeze for the ice
cubes to form.
Removing the ice cubes
Make sure that the ice cube storage bin is in place
under the ice cube tray. If not, slide it into place.
Twist one of the levers firmly in the clockwise
direction until the tray twists slightly.
Result : The ice cubes fall into the storage bin.
Repeat Step 2 for the other half of the tray, if
necessary.
Remove the storage bin by:
• Lifting it slightly
• Pulling it towards you
- REMOVABLE ICE TRAY MODEL
Making ice cubes
Remove the ice cube tray by pulling it towards
you.
Fill the tray with water up to the maximum water
level marked on the rear of the tray.
Slide the tray back into the holder, taking care not
to spill the water.
Removing the ice cubes
To remove ice cubes, hold the tray at its ends
and twist gently.
Danger of explosion
• Glass bottles containing liquids that can freeze should never be stored in the
CAUTION
freezer as the glass will explode when the contents freeze.
To get more space, you can remove the TWIST ICE MAKER, ICE STORAGE BIN
and ICE CUBE TRAY. It does not affect thermal and mechanical characteristics.
A declared storage volume of frozen food storage compartment is calculated with
these drawers removed.
water level
_1
operating