Improving Fuel Economy And Reducing Co Emissions; Refueling - Honda INSIGHT Owner's Manual

DRIVING
4. Select one of the options.
Fixed Guideline: Guidelines appear when you shift into Reverse. Select
On or Off.
Dynamic Guideline: Guidelines move as you turn the steering wheel.
Select On or Off.
5. Press BACK to exit the menu.
The rear camera view is restricted. You cannot see the corner ends of the
bumper or what is underneath the bumper. Its unique lens also makes
objects appear closer or farther than they actually are.
Visually confirm that it is safe to drive before backing up. Certain conditions
(such as weather, lightning, and high temperatures) may also restrict the
rear view. Do not rely on the rearview display, which does not give you all
the information about conditions at the rear of your vehicle.
Improving Fuel Economy and Reducing CO
Achieving fuel economy and reducing CO
factors, including driving conditions, load weight, idling time, driving habits, and
vehicle condition. Depending on these and other factors, you may not achieve
the rated fuel economy of this vehicle.

Refueling

Use the proper fuel and refueling procedure to ensure the best performance
and safety of your vehicle.
Fuel Information
n
Use of unleaded gasoline of 87 octane or higher is recommended.
• Honda recommends TOP TIER Detergent Gasoline where available.
• Do NOT use gasoline containing more than 15% ethanol.
• Do NOT use gasoline containing methanol.
• Do NOT use gasoline containing MMT.
We recommend quality gasoline containing detergent additives that help
prevent fuel system and engine deposits. In addition, in order to maintain
good performance, fuel economy, and emissions control, we strongly
recommend the use of gasoline that does NOT contain harmful
manganese-based fuel additives such as MMT, if such gasoline is
available.
How to Refuel
n
100 |
Emissions
2
emissions is dependent on several
2
1. Stop your vehicle with the service
station pump on the left side of the
vehicle in the rear.
2. Put the transmission into Park.
3. Turn the power system off.
4. Press the fuel fill door release
button.
Please Wait appears for a few
seconds on the driver information
interface
5. When the message changes to
Ready, the fuel fill door
automatically opens.
You can now unscrew the fuel cap
and start refueling.
6. Remove the fuel fill cap slowly. If
you hear a release of air, wait until
this stops, then turn the knob slowly
to open the fuel fill cap.
7. Place the fuel fill cap in the holder.
8. Insert the fuel filler nozzle fully.
When the tank is full, the filler
nozzle will click off automatically.
This leaves space in the fuel tank in
case the fuel expands with a
change in the temperature.
9. After filling, replace the fuel fill cap,
tightening it until you hear it click at
least once.
Shut the fuel fill door by hand.
Note: The automatic fuel tank vent does
not operate when using the manual fuel
door release. Gradually release
pressure by slowly turning the fuel fill
DRIVING
Fuel Fill Door Release Button
Fuel Fill Cap
Fuel Fill Cap
Holder
| 101