Samsung SP-F10 Owner's Instructions Manual page 53

• Projector Management
• You can check a projector's LED runtime, temperature, operation, errors, etc in real time.
: You can view a projector's Name, IP Address, Group, Power On/Off status, LED runtime, operation errors
(represented by icons), etc. in real time.
Samsung Projector Manager displays icons that indicate a projector's status. The icons are listed in the tables
below. If the icons indicate a problem with your projector, see "Clearing Indicator Problems" in secton 3-4, LED
Indications.
Warning and Error status icons
ICONS STATUS
Error
Error
Error
Error
Error
Warning
Error
Error
Temperature Level Status Icons
ICONS
Temperature status
Temperature status
Temperature status
Using
The LED has reached the end of its life.
The cooling fan 1 is not operating normally.
The cooling fan 2 is not operating normally.
The cooling fan 3 is not operating normally.
The cooling fan 4 is not operating normally.
The internal temperature of the projector has
risen higher than the limit.
The internal temperature of the projector has
risen higher than the limit.
The internal temperature of the projector has
risen higher than the limit.
STATUS
The projector's internal temperature is
normal.(standby mode)
The projector's internal temperature is
normal.(low)
The projector's internal temperature is
normal.(medium)
STATE
STATE
ACTION
Refer to Action 4 in Clearing Indicator
Problems.
Refer to Action 1 in Clearing Indicator
Problems.
Refer to Action 3 in Clearing Indicator
Problems.
Refer to Action 3 in Clearing Indicator
Problems.
Refer to Action 3 in Clearing Indicator
Problems.
ACTION
None. It's normal.
None. It's normal.
None. It's normal.
3-6