Adding And Erasing Channels - Samsung SP-50L7HR Instruction Manual

Storing Channels in Memory (Automatic Method)
First, select the correct signal source ("Air", "STD", "HRC" or "IRC") as
described on the previous page.
1
Press the MENU button.
Press the ... or † button to select
"Channel", then press the ENTER button.
2
Press the ... or † button to select "Auto
Program", then press the ENTER button.
Press the ENTER button to start the auto
program.
The TV begins memorizing all of the
available stations.
Press the ENTER button at any time to
interrupt the memorization process.
Press the EXIT button to exit.

Adding and Erasing Channels

You can add channels that were not memorized or delete unwanted channels
from memory.
1
Press the MENU button.
Press the ... or † button to select
"Channel", then press the ENTER button.
2
Press the ... or † button to select
"Add/Delete", then press the ENTER
button.
Repeatedly pressing the ENTER button will
alternate between add channel and delete
channel.
Press the CH or CH
to the appropriate channel, then repeat
above.
Press the EXIT button to exit.
Alternate method
Simply press the ADD/DEL button on the remote control to add or delete channels.
Input
Picture
Sound
Channel
Setup
Input
Picture
Sound
Channel
Setup
Air 12
button to switch
Change
Channel
√
Antenna : Ant.1
√
Air/CATV : Air
√
Auto Program
√
Add/Delete
√
Favorite Channels
√
Name
√
Fine Tune
▼ More
Move Enter Return
Auto Program
Start
Enter Return
Channel
√
Antenna : Ant.1
√
Air/CATV : Air
√
Auto Program
√
Add/Delete
√
Favorite Channels
√
Name
√
Fine Tune
▼ More
Move Enter Return
Add/Delete
Not In Memory
Add
Enter Return
English - 27