Display Modes - Samsung HLN4365W Instruction Manual

BP68-00142A-5 5/27/03 10:08 AM Page 80
PC Display

Display Modes

Mode Total
Resolution
640x350
VGA 800x449 31.47 kHz
720x400
900x449 31.47 kHz
720x400
936x446 37.93 kHz
640x480 800x525 31.47 kHz
640x480
864x525 35.00 kHz
640x480
832x520 37.86 kHz
640x480
840x500 37.50 kHz
640x480
832x509 43.27 kHz
SVGA 800x600 1024x625 35.16 kHz
800x600
1056x628 37.88 kHz
800x600
1040x666 48.08 kHz
800x600 1056x625 46.87 kHz
800x600
1048x6321 53.67 kHz
832x624
1152x667 49.73 kHz
1024x768
XGA 1344x806 48.36 kHz
1024x768
1328x806 56.40 kHz
1024x768 1312x800 60.02 kHz
1920x1080i
DTV 2200x1125 33.75 kHz
1280x720p
1650x750 45.00 kHz
720x483p
858x525 31.47 kHz
NOTE
Both screen position and size will vary, depending on the type of PC monitor and its resolution.
The table above shows all of the display modes that are supported:
* The interlace mode is not supported.
* The TV will operate abnormally if a non-standard video format is selected.
NOTES
• When this TV is used as a PC display, 32-bit color is supported (over 16 million colors).
• Your PC display screen might appear different, depending on the manufacturer (and depending
on your particular version of Windows). Check your PC instruction book for information about
connecting your PC to a TV display-monitor.
• Same modes as PC are supported for the signal input to the DVI jack. Only a separate sync
signal is supported.
80
Hor. Freq Polarity Ver. Freq Polarity Pixel Clock Sep Com
P 70.00 Hz N 25.175 MHz 0
N 70.00 Hz 28.322 MHz 0
N 85.00 Hz P 35.5 MHz 0
N 60.00 Hz P 25.175 MHz 0
N 66.70 Hz N 30.24 MHz 0
N 72.80 Hz N 31.5 MHz 0
N 75.00 Hz N 31.5 MHz 0
N 85.00 Hz N 36 MHz 0
N/P 56.30 Hz N 36 MHz 0
P 60.30 Hz N/P 40 MHz 0
P 72.20 Hz P 50 MHz 0
P 75.00 Hz P 49.5 MHz 0
P 85.10 Hz P 56.25 MHz 0
N 74.60 Hz P 57.284 MHz 0
N 60.00 Hz N 65 MHz 0
N 70.10 Hz N 75 MHz 0
P 75.00 Hz N 78.75 MHz 0
X 60.00 Hz P 74.25 MHz 0
X 60.00 Hz X 74.25 MHz 0
X 60.00 Hz X 27 MHz 0
How to Set up Your TV as a PC display
SOG
"Auto Adjust" allows the TV to self-adjust to the incoming video signal. The values of fine,
0 x
coarse and position are adjusted automatically.
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
0 x
x x
x x
x x
Press TV/VIDEO on the remote con-
1
trol.
Move the joystick up or down to
select PC, then press the joystick to
enter.
Press the Menu button.
2
Move the joystick down to
select "PC", then press the
joystick to enter.
Move the joystick down to
2
select "Auto Adjust".
Press the joystick to enter.
3
81