Storing Channels in Memory Automatically
First, select the broadcast source as
1
described on the previous page. With
the Channel Setup menu on screen,
move the joystick down to select "Auto
Channel Memory."
Press the joystick to enter. The TV will
2
begin memorizing all of the available
stations. Press the VOL+ button at any
time to interrupt the memorization
process.
NOTE
• When the ANT B mode is selected, the auto programming runs on the main screen.
Adding and Erasing Channels
Use the number buttons to select the
1
channel you want to add or erase.
To add a channel, select it and press the
2
Add/Erase button on the remote control.
The channel will be added to the TV's
memory and the word "Channel added"
will appear in the corner of the screen.
To erase a channel, select it and then
3
press the Add/Erase button on the
remote control. The word "Channel
erased" will appear in the corner of the
screen. You can still view a channel that
has been erased from memory by using
the number buttons on the remote control
to select the channel directly.
Move
Select
Menu
33