Mounting The Cisco Switch - Cisco 200E Series Quick Start Manual

Welcome
Thank you for choosing the Cisco 200E series Advanced Smart Switch, a
Cisco Small Business network communications device. This device is
designed to be operational right out of the box as a standard bridge. In the
default configuration, it will forward packets between connecting devices
after power up.
Package Contents
• Cisco SF200E-24/P or SF200E-48/P Advanced Smart Switch
• Rackmount Kit
• Power Cord or Power Adapter
• This Quick Start Guide
• Product CD
• Serial Cable
• Rubber Feet
This guide will familiarize you with the layout of the advanced smart switch
and describe how to deploy the device in your network. For additional
information, see www.cisco.com/smb.

Mounting the Cisco Switch

1
There are two ways to physically install the switch:
• Set the switch on a flat surface.
• Mount the switch in a standard rack (1 rack unit high).
Do not deploy the device in a location where any of the following
conditions exist:
High Ambient Temperature—The ambient temperature must not
exceed 104 degrees Fahrenheit (40 degrees Centigrade).
Reduced Air Flow—Both side panels must be unobstructed to prevent
overheating.
Mechanical Overloading—The device should be level, stable, and
secure to prevent it from sliding or shifting out of position.
Circuit Overloading—Adding the device to the power outlet must not
overload that circuit.
2 200E Series Advanced Smart Switches