Connecting A Digital Audio System; Connecting To An Analog Amplifier - Samsung HL-R4266W Owner's Instructions Manual

Connecting a Digital Audio System

There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner's manual.
If your audio system has an
1
optical digital audio input,
connect to the "DIGITAL
AUDIO OUT (OPTICAL)" jack
on the TV.
NOTE
• OPTICAL: converts the electric
signal into an optical light
signal, and transmits it through
glass fibers. A transmission
system of digital audio in the
form of a light wave, S/PDIF
format using a glass conductor.
See page 77 to set the digital
output format (Dolby Digital or
PCM) appropriate to your
digital audio component.

Connecting to an Analog Amplifier

The "AUDIO OUT" terminals
1
cannot be used for external
speakers. You must hook
them up to an amplifier.
When an audio amplifier is
connected to the "AUDIO
OUT" terminals: Decrease
the gain (volume) of the
audio amplifier, make the
internal mute on and adjust
the volume level with the
volume control of the
amplifier.
NOTE
• In case the input is HDMI or
Component, the audio monitor
output signal is available only
when Internal Mute is On.
(Refer to page 78)
TV Rear Panel
Audio System
TV Rear Panel
Amplifier
English - 27