Table of Contents
Advertisement
VI. FAQ
Faults occurring
The power indicator
light is not on
Impossible plug-and-play
Dimming picture
Flickering picture or
picture with ripples
The power indicator
light is on (flickering),
but the monitor has no
pictures.
Color shortage
(red, green and blue)
Picture with color difference
(white looks not white)
Please confirm the default values of the output dynamic range and the pixel
format in the graphics Settings is "all". when the brightness of the screen is
higher than usual.
Possible solutions
◆
Check if the power is on.
Check if the power cord is connected.
◆
◆
Check if the function of plug-and-play of the device
is compatible with PC.
Check if the display card is compatible with the
◆
plug-and-play function.
Adjust brightness and contrast.
◆
There may be electrical appliances or equipment
◆
with electronic disturbance.
◆
Check if the PC power is on.
◆
Check if the PC display card is inserted properly.
◆
Check if the signal cable of the monitor is correctly
connected with the PC.
◆
Check the signal cable plug of the monitor and make
sure every pin has no bending.
Observe the indicator light by pressing the Caps
◆
Lock key on the PC keyboard and check if the PC
is working.
◆
Check the signal cable of the monitor and make
sure every pin has no bending.
◆
Adjust RGB color or reselect color temperature.
All specifications and informations are subject to change without notice.
-6-
Hide quick links:
Advertisement
Table of Contents
