Sending A Fax Automatically - Samsung SCX-1150F User Manual

Sending a Fax Automatically

1
Feed the document(s) to be faxed face up into the ADF until
"DOCUMENT READY" appears in the display.
Or
Place a single document on the document glass face down
then close the cover. For details on loading original
documents, see page page 3.3.
2
You can adjust the resolution and the contrast to suit your
fax needs. For details, see "Adjusting Quality of Your Fax" on
page page 5.4.
3
Enter the number of the remote fax machine using the
number keypad.
If you make a mistake while entering a number, move the
cursor under the wrong digit by using the Scroll buttons (
or ), and correct the number or press Search/Delete to
delete the number.
4
To send faxes in black and white, press Start FAX Black.
To send faxes in colour to the fax machines with colour
capability, press Start FAX Color.
5
If the SEND FROM MEMORY feature is set to ON (default
setting), the document is scanned into memory and the
display shows the memory capacity and the number of pages
being stored in memory.
If the document is fed from the document glass, the display
shows "NEXT GO ON?" on the top line after the document is
scanned into the memory. If you have the next page, remove
the scanned page and load the next page on the glass and
press Enter. Repeat as necessary.
When all pages are scanned, press Cancel/Reset when the
display shows "NEXT GO ON?."
6
The number is dialled then begins transmission when the
remote fax machine is ready.
N :
If you want to cancel the fax, press Cancel/Reset at any
OTE
time during the transmission.
FAX 5.7