Table of Contents
Advertisement
Making Installation Diskettes
Use the following procedures to copy software installation files from the
QwikLaser 6100 CD-ROM onto floppy diskettes for installation onto com-
puters that do not have a CD-ROM drive. To install the software, see
"Installing Software from Diskette" (page 2.19).
PCL6 Printer Driver
1. Label a new or freshly formatted diskette "QwikLaser 6100 PCL6
Driver" and insert it into the floppy drive.
2. Windows 95/98 and 3.1x:
Copy d:\XX\pcldrv\pcl6\win9x3x\*.* a:\
(where "d" is the CD-ROM drive letter, XX is the language code
EN for English, and "a" is the floppy drive letter).
Windows NT 4.0:
Copy d:\XX\pcldrv\pcl6\winNT\*.* a:\
(where "d" is the CD-ROM drive letter, XX is the language code
EN for English, and "a" is the floppy drive letter).
RCP/SM
1. Windows 95/98 and 3.1x:
Label a new or freshly formatted diskette "QwikLaser 6100 RCP/SM"
and insert it into the floppy drive.
Windows NT 4.0:
Label a new or freshly formatted diskette "QwikLaser 6100 RCP" and
insert it into the floppy drive.
2. Copy d:\XX\rcp_sm\*.* a:\
(where "d" is the CD-ROM drive letter, XX is the language code
EN for English, and "a" is the floppy drive letter).
1 Refer to the table on the last page for language codes.
, i.e.
1
, i.e.
1
, i.e.
1
Printer Setup
2.
17
Advertisement
Table of Contents
