Samsung YP-U2J User Manual page 50

Settings
Setting the System
<Bit Rate> : Selects the recording quality. Select either <32kbps> <64kbps> or <128kbps>
I
(the higher the number is, the better audio quality and the larger the file size becomes).
<Resume> : Specifies the starting point to restart playback after the music you are listening to is
I
stopped. If set to <Off>, the last file listened to will play from the beginning. If set to <On>, the last
file listened to will play from the point where last played.
<Beep> : Sets the beep sound for button operations to on or off. Select either <On> or <Off>.
I
<Default Vol> : The default volume can be set from 00 to 30(Max).If the power is turned on again
I
after adjusting the volume above the default volume, music is played at default volume.
If the power is turned on again after the volume was set within the default volume, the music is
played at the previously played volume.
<Default Set> : Returns all settings to the default value.
I
<About> : Checks the firmware version, number of stored files, remaining memory.
I
Regarding the Built-In Memory
I
NOTE The actual built-in memory available is slightly less than indicated as the internal firmware uses a portion
of the memory.
Default Settings
50
(Continued)
Press the [ + , - ] button to select either <Yes> or <No>
and then press the [
<Yes> : Initializes all settings to default.
I
<No> : Cancels default settings.
I
] button.