Eq Function; Dnse Function; Eco Mode Function; Mute Function - Samsung MM-X5 Instruction Manual

EQ Function

GB
Your micro component system is equipped with a pre-
set equalizer that allows you to choose the most
appropriate
balance between treble and bass frequencies, accord-
ing to the type of music you are listening to.
Press EQ button until the required option is selected.
Result: Press the button repeatedly to select "
PASS➞POPS➞ JAZZ ➞CLASSIC ➞ ROCK ".

DNSe Function

Your compact system is equipped with the DNSe
function.
use this function you can select an appropriate
sound effect for music.
Press DNSe button until the required option is select-
ed.
Result: Press the button repeatedly to select "
PASS➞STUDIO➞ STAGE➞CONCERT ".
What is DNSe?
Digital Natural Sound Engine(DNSe) is a sound effect
function developed by Samsung.It provides various sound
settings to enhance the type of music you're listening to.
16

ECO Mode Function

You can save power consumption while the unit is
turned off(on standby)
To activate the ECO mode,Press the
STANDBY/ON/ECO button while the unit is turned
off(on standby).
When ECO is activated,the DEMO mode will not
work.

MUTE Function

You can turn the sound off temporarily on your sys-
tem.
Example: You wish to answer a telephone call.
1
Press MUTE ( ).
2
To switch the sound back on (at the same volume as
before), press MUTE again or the VOLUME buttons.
Setting the System to Switch off
Automatically
While listening to a compact disc , you can set the
system to switch off automatically
Example: You wish to go to sleep to music.
1
Press SLEEP button until the option is selected .
Result: The following indications are displayed:
90 MIN
2
Press SLEEP one or more times to indicate how long
the system should continue playing before it switches
off:
90 MIN 60 MIN 45 MIN
OFF 15 MIN 30 MIN
At any time, you can:
Check the remaining time by pressing SLEEP.
Change the remaining time by repeating Steps
1 and 2.
3
To cancel SLEEP function, press SLEEP more times
until OFF is display.

Connecting Headphones

You can connect a set of headphones to your micro
component system so that you can listen to music
without disturbing other people in the room. The head-
phones must have a 3.5ø plug or an appropriate
adapter.
Connect the headphones to the PHONES jack on the top
panel.
Result: The loudspeakers are no longer used to output the
sound.
Prolonged use of headphones at a high volume may
damage your hearing.
GB
17