Connection To A Tv (Interlace) - Samsung DVD-V8600 Instruction Manual

Connection to a TV (Interlace)

- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(Y), blue(P
are delivered through the audio output.)
1
Using component video cables (not included),
connect the COMPONENT VIDEO OUT terminal
on the rear of the DVD-VCR to the COMPONENT
IN terminal of your TV.
2
Using the audio cables, connect the AUDIO (red
and white) OUT terminals on the rear of the
DVD-VCR to the AUDIO (red and white) IN
terminals of your TV.
Turn on the DVD-VCR and TV.
3
With the unit in stop mode, set the Alt video
output to Component: Interlace in the Display
Setup menu (see pages 58~59) or press the
P.SCAN button on the front panel until Interlace is
output.
4
Press the input selector on your TV remote
control until the Component signal from the DVD-
VCR appears on the TV screen.
Notes
- If Video output is incorrectly set to S-Video with the Component cables connected, the screen will
turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The component terminal of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "P
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
C
O N N E C T I O N S
), red(P
B
) signals to present clear and clean images. (Audio signals
R
White
Red White
ENG-15
Blue
Red
Green
Red
Audio Cable
Component Cable
(not included)
Red Blue
Green
R
, P , Y"
B