Connecting Audio From External Components - Samsung HT-X200 Instruction Manual

Connecting Audio from External Components

AUX1 : Side Panel
Audio Cable
(not supplied)
AUX1 : Connecting an External Component/MP3 player
1
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player.
2
Press the AUX button on the remote control to select <AUX1> input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD D.IN AUX 1
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
Be sure to match connector colors.
2
Press the AUX button on the remote control to select <AUX2> input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD D.IN AUX 1
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
18
AUX2 : Rear Panel
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
or right.
AUX 2 USB FM.
AUX 2 USB FM.
OPTICAL : Rear Panel
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2
Press the AUX button on the remote control to select <D.IN>.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD D.IN AUX 1
Optical Cable
(not supplied)
AUX 2 USB FM.
ENG
19