Before Using Your Home Theater; Disc Playback - Samsung AH68-01943R Instruction Manual

Before Using Your Home Theater

To Operate your Samsung TV and the Home Theater with the HT-X200's Remote Control
The DVD Home Theater's remote can be used to control Samsung TVs.
1
Plug the main unit's power cord into the AC power supply.
Before plugging your system into a main socket, you must check the voltage
setting (OPTIONAL). If the voltage of the socket does not correspond to the
setting on the rear of the unit, you may seriously damage your system.
2
Press the TV button to set the remote to TV mode.
3
Press the POWER button to turn on your Samsung TV
with this remote.
4
Press the TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
5
Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6
Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD playback.
22

Disc Playback

DVD CD
1
Load a disc vertically into the Disc Insert Hole.
Insert a disc so that the label side faces forward.
Playback starts automatically.
ALL
2
To eject the disc, press the EJECT button.
To stop playback, press the STOP button during playback.
If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE (
beginning.
To temporarily pause playback, press the PLAY/PAUSE
To resume playback, press the PLAY/PAUSE ( ) button again.
• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection
system) recommendations.
) button is pressed, playback starts from the
button during playback.
( )
ENG
23