Sound Mode - Samsung 5.1CH BLU-RAY HT-C6900W User Manual

Basic Functions
4. If there is an undesired track in the playlist,
press the YELLOW (C) button again.
The selected track will be deleted.
5. Press the ENTER button to play the selected
tracks.
TRACK 001
+
00:08 / 05:57
6. To go to the Music List, press the STOP ()
or RETURN button.
7. To go to the Playlist, press the ENTER
button.
✎
NOTE

You can create a playlist with up to 99 tracks
on Audio CD (CD-DA).
54
English
1/1
Playlist
TRACK 001
05:57
TRACK 002
04:27
TRACK 003
04:07
s Tools r Return
Pause

Sound Mode

DSP (Digital Signal Processor) Function
DSP regulates the volume level and decreases
drastic volume changes when you change
channels or during a scene transitions.
When you press the DSP button, it
cycles through the following functions:
SMART SOUND ¨ MP3 ENHANCER ¨
POWER BASS ¨ DSP MODE OFF
• SMART SOUND : Regulates the volume level
and deceases drastic volume changes when
you change channels or during a scene
transition.
• MP3 ENHANCER : This also helps enhance your
sound experience (ex. mp3 music). You can
upscale your MP3 level sound (24 kHz, 8bit) to
CD level sound (44.1 kHz, 16bit).
• POWER BASS : This function stresses low
tones providing deep, powerful sound effects.
SFE (Sound Field Effect) MODE
You can set the SFE mode best suited for the
type of music you are listening to.
When you press the SFE MODE
button, it cycles through the following
functions:
Provides a clear vocal as if
HALL1
listening in a concert hall.
Also provides a clear vocal as if
HALL2 listening in a concert hall but, less
powerful than HALL1.
JAZZ Recommended setting for Jazz.
Gives the feel of being in a grand
CHURCH
church.
ROCK Recommended setting for Rock.
SFE OFF Select this for normal listening.
DSP
SFE MODE